Categories
- Kompozit gépek
- Additives
- Adhesives
- Chopped strand mats
- Core materials
- Epoxy resins
- Fabrics
- Fillers
- Gelcoats
- Grinding and polishing materials
- Jesmonite ® acrylic systems
- Pigments
- Polyester resins
- Polyurethane resins
- Release agents
- Safety equipments
- Silicones
- Tools and auxiliary
- Vacuum bagging materials
- Vinylester resins
Product Details
Spherecore SP 3,0 mm 90 g/m2, width: 100 cm, 50 m/roll
 |
Spherecore SP, the volumized polyester nonwoven, is stretchable and drapable, length- and crosswise, in both dry and wet condition. For this reason it is well suited for making parts of complex component geometry. It is mainly used in hand lay up process, but can also be used for surface infusion and wet pressing.
-
This product is very elastic and well drapeable when wet.
Available in 1mm/2mm/3mm/4mm/5mm thicknesses.
Calculate the amount of resin needed for covering layers and core materials.
For SphereCore SP you will need approx. 600 g/m²/mm.
Example: SphereCore SP 3,0 mm: 600g*3mm = approx. 1800 g resin per m².
-
thickness (mm) 3 mmWeight 90 g/m2